091119_ft

Tips to Minimize Wear and Tear on Your Car

Preventative care, careful driving and regular maintenance all contribute to your car’s longevity, making it stay longer on the roads than in a garage. Proper care also helps you save a lot of money in the long run. Here are a few tips on how to make sure the wear and tear in your car is minimized.

Stick to your maintenance routine:
Familiarize yourself with your car’s maintenance schedule and stick to it. As your car age, more maintenance is required and car manufacturers always recommend regular service intervals. If you don’t do a regular service on your car, you run the risk of causing damage to your engine and other parts because service centres know what needs to be checked and replaced with time, such as spark plugs, oil, filters, etc.

67485421_135862780999709_9137288876654855524_n

Never miss an oil change:
Oil is the lifeblood of your engine and over time the motor oil begins to degrade and lose its lubricating and cooling properties potentially damaging metal-on-metal contact. Regularly changing your oil and filter can save you in the long run, the failure of which could have you replacing your whole engine!

Warm-up!
Everyone is always in a hurry and it’s not uncommon to want to jump into our cars and rush off. But experts recommend that it is important to give your engine a minute or two to warm up. This helps your engine oil heat up and lubricate all the parts. It’s also best to avoid higher RPMs and speeds until the engine is properly warmed up and running at normal temperature.

Give your brakes a break:
Prolong the life of your brake pads and discs by easing up on constantly using them. The safest way to do it is by slowing down. The faster you drive, the more you will need to step on the brakes sharply. Keep a safe distance between the vehicle in front of you, which will give you more time to come to a slower stop without having to jam on the brakes often.

Use the parking brake:
A better option is to engage the parking brake when you stop. First, step on your brake pedal and then engage your parking brake; put the car into park and release your foot off the pedal. This will prolong your car’s transmission allowing the parking brake to take the car’s weight and not the transmission.

Leave a Reply

Your email address will not be published. Required fields are marked *